ProFloor Screed FD
ProFloor Screed FD is a high-performance screed that dries faster than standard screed. Screeds are used in construction to create a level surface, usually on top of a concrete subfloor or suspended block & beam system, before the final floor finish is applied. Also, Our fast drying screed has been formulated to reduce the drying time significantly, which can be beneficial in speeding up construction projects.
ProFloor Screed FD, a modified with additives cementitious floor screed system, is enhanced with fiber reinforcement, which produce an early drying high-strength screed ready to receive floor finishes between 4 days and 6 days, depending on the thickness. Moreover, Screed FD is mixed, pumped, and laid similarly to conventional sand cement screeds.
ProFloor Screed FD is the ideal solution for leveling concrete floors where designers want to have bonded, unbonded, floating, or heated screeds on both existing and new concrete before the installation of wood, PVC, linoleum, acoustic flooring, resin flooring, ceramic tiles, natural stone, carpet or any other flooring where rapid drying is required for short installation times.
ProFloor Screed FD is suitable for indoor and outdoor uses.
Advantages of Ultra fast-drying floor screed system:
- Fast track construction- ultrafast drying screed.
- Light foot traffic after 12 hours.
- Ceramic tiles can be laid after 24 hours.
- Natural stone can be laid after 2 days.
- Resin, wood, and waterproofing can be laid after 4 days.
- Suitable for use incorporating underfloor heating systems.
- Cost-effective; outstanding resistance to aging and weathering.
- System components meet BREEAM and LEED requirements.
